Book Beanie. . . does anyone have one?

[sandrahd]

If you have one of these, can you tell me if there is a gusset on the bottom on both sides?  (i want to make one. . .for my personal use only--I promise!)

[Alice Coyl]

It looks like it is a 7" x 9" rectangular sewn together with the beans inside. Then you sit it up with one of the seams facing you. When I get my beans, I'll check it out and see if that is what the Book Beanie is made like. You can order the beans from amazon.com if you want or go to your local craft shop.

[PG4003 (Patricia)]

If you don't get a response here, maybe you could send a message to these 2 people who reviewed it on Amazon.  http://www.amazon.com/Book-Beanie-Bookstand-Cheerfully-Electronic/product-reviews/B004QW27N6

[sandrahd]

Thanks, I did the two rectangles sewn together and squared off 3 corners (gussets. . .although a typical gusset is a separate structure).  I had some of the poly-styrene pellets left over from another project.  I think I got them from Hobby Lobby. 



I'll get a lot of use out of it!

Sandra

[Kelly (Michigan)]

very nice

[Patricia]

I'm wondering how they work with a kindle in a cover.  Has anyone tried??

[KimberlyinMN]

That turned out great!  I like that it doesn't have any "eyes" like the marketed one.

[PG4003 (Patricia)]

You did a great job with that, it looks just like the ones on their web site (minus the eyeballs!).  You should be proud.

[sandrahd]

Yeah, I was thinking that the eyeballs would be distracting and certainly not necessary.  I almost wish i had thought about trying to match the print along the seam that shows in front, but oh well.

[maries]

My kindle is in a cover and I'm hoping to try the one out I bought as a gift when it arrives.

sandrahd - very nice job!

[grjag]

That is soooo cool!  Hmmmm....more enabling going on.  This may have to go on my wish list.

[maries]

The Book Beanie arrived today so I will test it out tonigt.   Preliminary test using it on a suface with the Kindle in an Oberon was a success.  It held it just fine.

It is cute with the little eyes but I don't think you will see them when reading.   I could do without them though but don't mind them.

The BB itself was smaller and lighter weight than I was expecting.   It seems cheaply made so I bet that the one Sandrahd made and Alice is working on will be better quality.   Doesn't seem like many styrofoam pellets in there.   Functionality is still key and I will post on that and more details after testing it out.

More info to follow...............

[sandrahd]

I think the $20 price tag was a bit high for what it is, but I'm thrifty like that when I can make it just as easy .  Even if I had gone to buy materials to make it at non-wholesale prices, it would have cost me less than $5 to make. 

I filled my bag about 2/3 of the way full with the teeny-tiny polystyrene beads.  I think you have to leave some space, so they can move around in order to make space for the pouch for the kindle.

Sandra

[maries]

I think the $20 price tag was a bit high for what it is, but I'm thrifty like that when I can make it just as easy .  Even if I had gone to buy materials to make it at non-wholesale prices, it would have cost me less than $5 to make. 

I filled my bag about 2/3 of the way full with the teeny-tiny polystyrene beads.  I think you have to leave some space, so they can move around in order to make space for the pouch for the kindle.

Sandra

What size did you cut the fabric?   I think the one you made looks a little bigger than the BB.   It worked fine but I think it could have been a little bigger for a regular book or ereader in a cover.   It only weighs aout 1.5 ounces.

[SamIam]

that is very nice

[Hadou]

I can't help but feel that there needs to be an included caption of "OM NOM NOM" next to one of the beanies.

[laurie_lu]

I bet a velvet or velour fabric would look quite nice.

[sandrahd]

I cut 2 pieces 12 X 14 inches and used a 1/2-inch seam allowance.  The website says that the BB measures 9 X 7 X 1.75 and I miscalculated, so mine is a bit bigger by about 2 inches each direction.

Sandra

[maries]

I cut 2 pieces 12 X 14 inches and used a 1/2-inch seam allowance.  The website says that the BB measures 9 X 7 X 1.75 and I miscalculated, so mine is a bit bigger by about 2 inches each direction.

Sandra

That was probably a good mistake.   The size looks perfect for your Kindle.  The BB I bought works OK but my thought was that a little bigger would be better.

[buyonamazon]

That was probably a good mistake.   The size looks perfect for your Kindle.  The BB I bought works OK but my thought was that a little bigger would be better.

I second this. It actually looks perfect!

[albianne]

I love this, you did a great job.  So to make one I just sew 2 12X14 pcs of cloth together in a rectangle and fill 2/3 full of beads, that's it?  Seems too easy, lol.  I think I would really get a lot of use out of this, especially while laying in bed on my side, right now I always worry that I will fall asleep and my Kindle will fall off the bed on the floor.

[PG4003 (Patricia)]

I love this, you did a great job.  So to make one I just sew 2 12X14 pcs of cloth together in a rectangle and fill 2/3 full of beads, that's it?  Seems too easy, lol.  I think I would really get a lot of use out of this, especially while laying in bed on my side, right now I always worry that I will fall asleep and my Kindle will fall off the bed on the floor.

I'm thinking you have to put a gusset on the "front" side, that's what forms the flat part in the front.  A gusset is really very easy to do, Google it if you aren't sure.

[sandrahd]

Take two pieces of fabric that are 12 inches X 14 inches and sew them right sides together leaving an opening along one edge to fill.  The top corner where your loop will go will stay as sewn, but you will do a gusset on the 3 other corners.  Fill and close the opening. 

[KimberlyinMN]

I made a little trip to Joann's this morning. They have their quilting quarters on sale for 50% off. (I think they are 18" x 21" or something like that.)  Originally $1.99 each. I bought two each of three different designs, so a total of six quarters for $6. I looked all over for those darn poly beads and finally had to ask someone. I actually had been in the right place, but the eyes on my shins didn't see them. LOL A 2-lb bag was $6.99. (And since I wasn't really sure how much I'd need, I bought two bags.)  Even the thread was on sale!!  Now, if I'd have been thinking, I would have brought my smart phone with me to use their coupon app, but alas, I didn't.  (Dang, I could have saved 40% on one bag.)  My plan is to make three of these. One for my bedroom, one for the living room, and one for my dad.   Now to try out my rusty sewing. Thank goodness this isn't too complicated. (I hope.)

[KimberlyinMN]

Hmmmm... Okay, I've sewn my first one. After putting in one 2-lb bag, which only seems to be about 1/3 of the beanie.... Sandra, how much does yours weigh?  I'm starting to think that I should have just used dry beans.  (BTW, I cut my rectangles down to 12" x 14".)  I'm one of those measure once, cut twice kind of people, so I'm actually quite amazed at how well this is going.